• Welcome to the ElgrandOC forum.

    You will find that the majority of the forum is locked, but do not worry. You can unlock more content by registering to the forum completely free. Sign up is automatic, does not require email confirmation and is instant. Feel free to browse through the sections to see what topics have been covered before you register.
    You can register for an account by CLICKING HERE

    Once you have registered, you will unlock more of the forum content. You will not unlock all of the content until you have reached 10 posts. This is to give you an opportunity to chat to existing members and help to integrate you into the forum community.
    We are a friendly and helpful community and there is a wealth of infomation contained within the forum. Please feel free to register, introduce yourself and get to know your fellow members.

    Feel free to look at the Frequently Asked Questions section, the Meets/Events section and the Competition Section without having to register.
    We look forward to getting to know you and help you with any questions or problemd you have with your Elgrand.

What have you done to your Elgrand today?

well i changed my high beam yellow looking bulbs for Philips x-treme vision pro 150 and they are brighter:cool: but still look yellow despite the blurb saying they are 150% brighter and a clearer crisper light :rolleyes:to be fair they are a bit whiter than what was in there but i was looking for pure white:confused: oh and i washed it :joy:
 
Replaced the main beam bulbs with replacements from Brian @ BMR.
MUCH brighter/better !
Finally sorted out the annoying fixed ETC message on the main screen. Now shows the heater controls, permanently on.
 
StevieP said:
Replaced the main beam bulbs with replacements from Brian @ BMR.
MUCH brighter/better !
Finally sorted out the annoying fixed ETC message on the main screen. Now shows the heater controls, permanently on.
Click to expand...
How did you do that?? Sounds like a good idea ..
 
Charles, I tried your method, but the button combination did not work. Seems there are more variations to these things than you can shake a stick at !
 
StevieP said:
Charles, I tried your method, but the button combination did not work. Seems there are more variations to these things than you can shake a stick at !
Click to expand...
That's strange, I figured most of that out from the ETC installation instructions.

Is yours a Series 2 or Series 3?

If you've worked out a different method that works can I suggest you add it to my how to post so they're all in one place 🙂
 
Ours is a Series 2.
Yes, makes sense to keep it all in one place. I’ll take photos & add to your post later.
Thanks.
 
You must log in or register to reply here.
Back
Top